Register
Set Ascending Direction
per page

Multi Tool Diamond Blades That I Use To Professionally Re-grout

These 4 premium blades are available in a pack here at -

https://mtblades.com.au/diamond-blades/professional-essentials-re-grout-pack-328.html

Professional Regrout Pack

With 10 years of experience re-grouting I found that not all re-grouting blades could do the job, especially carbide blades. It was difficult to source good blades. To this day I still re-grout, mostly showers, and I don't need any other types of multi tool blades. The four listed here are all I use.

2mm Edge x 61mm Diamond Swing Multi-Tool Blade (sku0079)

At MTBlades.com.au we are very proud to be releasing a new premium diamond plated multi tool blade – The 2mm Premium Diamond Multi Tool Blade (sku0079)

This diamond swing blade is an essential accessory tool for re-grouters. If you need to remove grout on shower walls, this particular blade is a necessary requirement to do the job well. The blade edge is slightly less than 2mm, approximately 1.95mm.

This blade was specifically manufactured with re-grouting in mind, especially between wall tiles, although it can be used in multiple applications. The blade edge is of the highest standard. It was tested against other competing diamond blades. It will last longer and saw with precision. This is a premium diamond saw blade.

This blade will suit professional shower re-grouting. We recommend use in conjunction with the 91mm semi-circular diamond

blade (sku 0068), which is best for the bulk of grout removal in shower walls.

2mm Edge x 91mm Semi-Circular Premium Diamond Multi-Tool Blade (sku0068)

The thin blade edge (1.95mm) allows for easy slicing through grout and other materials. Combining this with the large radius of the blade (91mm), the width of the oscillation is greater also. Through person experience and almost 10yrs of re-grouting I personally found this to be the ultimate wall grout remover. Us this in combination with the blade above to see excellent a fast results.

2.3mm Edge x 61mm Diamond Blade Swing Multi Tool Blade (sku0020)

This blade has a thicker blade edge. It is useful when removing grout where the gaps are larger like in shower bases and up to wall edges. It is also a necessity for re-grouting. Sometimes when the grout lines are wide it is better to have the wider blade to reduce tile chipping. In certain case using this blade makes the job faster and easier.

2.3mm Edge x 88mm Semi-Circular Premium Diamond Multi-Tool Blade (sku0025)

I use this blade in wall tiles to remove excess grout after using the 91mm blade above. The 91mm will easily cut through the grout. I then insert the 88mm, as it is thicker blade, to easily remove excess grout. This works well in cases where the wall grout is greater than 2.3mm in width. Used in this fashion these blades last a long time. However, it can still be used as the primary grout removal blade if required.

Top Quality Multi Tool Diamond Blades

The four multi tool diamond blades presented in this article are top quality. If you are intending to re-grout a shower these are the only multi tool blades you will need in 99% of cases.

Comments | Posted in Regrouting By Paul Craft

Diamond multi tool blades are excellent for grout removal. With over 5 years experience at re-grouting shower recesses, I can personally vouch that diamond blades are my preferred tool.

Read More
Comments | Posted in Regrouting By Paul Craft

Re-Grouting with Multi Tool Blades

20 May 2017 1:18:32 pm

Among the many different applications involved using a Multi-Tool, removal of old and discoloured grout is definitely one of them. Over the past ten years is has now become common place for tradesmen to use carbide and diamond tip blades for this purpose.

There are many factors to consider when removing grout.

Read More
Comments | Posted in Regrouting By Paul Craft
Set Ascending Direction
per page